BG 5195 BEN / A (2011-05) TPG261.oi 57
Ö The name of the parameter
e.g.:
Firmware version
is displayed.
The parameters are available for all gauge types and
thus always displayed.
→ 58 58 59 59
Available for
all gauges
The name of the parameter is dis-
played as long as the key is pressed
or at least for 1.5 s.
The firmware version is continuously displayed.
→ 60 60 61 61 62 62 63 64
Available for
all gauges
The name of the test program is displayed until
it is started.
Ö Increase/decrease the value
by the defined increments.
Selecting a
parameter
Editing a parameter
To Next Page
Loading...
