Pfeiffer TPG 261 - Page 75

BG 5195 BEN / A (2011-05) TPG261.oi 75
Transmit: RES [,x] <CR>[<LF>]
│
└─ x = 1 –> Cancels currently active
error and returns to
measurement mode
Receive: <ACK><CR><LF>
Transmit: <ENQ>
Receive: [x]x,[x]x,... <CR><LF>
│
└─ List of all present error messages,
xx =
0 –> No error
1 –> Watchdog has responded
2 –> Task fail error
3 –> EPROM error
4 –> RAM error
5 –> EEPROM error
6 –> DISPLAY error
7 –> A/D converter error
9 –> Gauge 1 error (e.g. filament
rupture, no supply)
10 –> Gauge 1 identification error
11 –> Gauge 2 error (e.g. filament
rupture, no supply)
12 –> Gauge 2 identification error
Reset