Pfeiffer TPG 261 - Offset correction (linear gauges)

BG 5195 BEN / A (2011-05) TPG261.oi 79
Transmit: OFC [,x,x] <CR>[<LF>] (
)
│ │
│ └─ Gauge 2, x =
│ 0 –> off (default)
│ 1 –> on
│ 2 –> auto (offset measurement)
│
└─ Gauge 1
Receive: <ACK><CR><LF>
Transmit: <ENQ>
Receive: x,x <CR><LF>
│ │
│ └─ Gauge 2
│
└─ Gauge 1
Transmit: OFD [,sx.xxxxEsxx,sx.xxxxEsxx] <CR>[<LF>]
│ │
│ └─ Gauge 2 Offset
1)
│ [in current
│ pressure unit]
│ (default = 0.0000)
│
└─ Gauge 1
1)
Values can be entered in any format. They
are internally converted into the floating point
format.
Receive: <ACK><CR><LF>
Transmit: <ENQ>
Receive: sx.xxxxEsxx,sx.xxxxEsxx <CR><LF>
│ │
│ └─ Gauge 2
│
└─ Gauge 1
Offset correction
(linear gauges)
Offset display
(linear gauges)