Pfeiffer TPG 261 - RAM test; EPROM test; EEPROM test

86
BG 5195 BEN / A (2011-05) TPG261.oi
Transmit: RAM <CR>[<LF>]
Receive: <ACK><CR><LF>
Transmit: <ENQ>
Starts the test (duration <1 s)
Receive: xxxx <CR><LF>
│
└─ ERROR word
Transmit: EPR <CR>[<LF>]
Receive: <ACK><CR><LF>
Transmit: <ENQ>
Starts the test (duration ≈5 s)
Receive: xxxx,yyyy <CR><LF>
│ │
│ └─ Check sum (hex)
│
└─ ERROR word
Transmit: EEP <CR>[<LF>]
Receive: <ACK><CR><LF>
Transmit: <ENQ>
Starts the test (duration <1 s)
Do not keep repeating the test (EEPROM life).
Receive: xxxx <CR><LF>
│
└─ ERROR word
Transmit: DIS [,x] <CR>[<LF>]
│
└─ x = 0 –> Stops the test – display
according to current
operating mode (default)
1 –> Starts the test –
all LEDs on
Receive: <ACK><CR><LF>
Transmit: <ENQ>
Receive: x <CR><LF>
│
└─ Display test status
RAM test
EPROM test
EEPROM test
Display test