14
3.3 Remote Control
1. POWER Button
y To turn the power on/off.
y If LED Power Indicator on the monitor is not
lightening, then the remote control will not work.
2. SMART Button
y To select smart picture mode from
[HIGHBRIGHT], [STANDARD], [sRGB],
[CINEMA].
y HIGHBRIGHT: for moving image such as Video
y STANDARD: for images (Factory setting)
y sRGB: for text based images
y CINEMA: for movies.
3. PIP (Picture In Picture) Button
y ON/OFF Button: To turn PIP mode ON/OFF.
y INPUT Button: To select the input signal for the
sub-picture.
y CHANGE Button: To exchange between the
main picture and sub-picture.
NOTE: The “PIP” and “POP” modes do not work if the
screen size is “CUSTOM” or “REAL”.
4. CONTRAST Button
To start CONTRACT OSD selection, and then
press “+” or “-” button to adjust the value.
5. DISPLAY Button
To turn on/off the setting information displayed on
the right-up corner of the screen.
6. “-” Button
y Decrease the adjustment with OSD menu.
y To move the sub-picture left when in “PIP” mode.
7. SET Button
To activate the setting with OSD menu
8. AUTO ADJUST Button
To execute the AUTO ADJUST function
9. MUTE Button
Mutes or restores audio output.
10. VIDEO SOURCE Button
To set video source by toggle selection from [HDMI],
[DVI-D], [VGA], [COMPONENT], [S-VIDEO],
[VIDEO] and [VGA (BNC)]
11. AUDIO SOURCE Button
To set audio source by toggle selection from
[AUDIO 1] to [AUDIO2], [AUDIO3] and [HDMI]
NOTE: [HDMI] is only selectable when video source is
set to [HDMI].
12. SIZE Button
To set picture size by toggle selection from [FULL],
[NORMAL], [CUSTOM], [DYNAMIC] and [REAL]
NOTE: [DYNAMIC] is for video mode only.
13. BRIGHTNESS Button
To start the BRIGHTNESS OSD selection, and
then press “+” or “-” button to adjust the value.
14. ▲ Button
y To move the highlight bar up to adjust the
selected item when OSD menu is on.
y To move the sub-picture up when in “PIP” mode.
To Next Page
Loading...
