Philips BDL3215E/00 - I;O Connectors

162
162
2.7 I / O Connectors
Connectivity overview:
RGB will be renamed to VGA
Rear Connectors:
• Power input: 3-pin IEC-320-C13 socket mains AC in.
• AC switch: Mains switch at line.
• PC input: 15 pins VGA D-Sub Female connector with silver 3.5mm
Mini-jack audio stereo connector
• VGA D-Sub connector pin assignment:
Pin Signal Assignment Pin Signal Assignment
1 Red video 2 Green video
3 Blue video 4 GND
5 GND 6 Red GND
7 Green GND 8 Blue GND
9 +5V (Supply from PC for DDC circuit) 10 Sync GND
11 GND 12 DDC serial data
13 H-sync 14 V-sync
15 DDC serial clock
• HDMI input: Type A includes digital video and audio, HDCP supported.
HDMI type A connector pin assignment:
Pin Signal Assignment Pin Signal Assignment
1 TMDS Data2+ 2 TMDS Data2 Shield
3 TMDS Data2– 4 TMDS Data1+
5 TMDS Data1 Shield 6 TMDS Data1–
7 TMDS Data0+ 8 TMDS Data0 Shield
9 TMDS Data0– 10 TMDS Clock+
11 TMDS Clock Shield 12 TMDS Clock–
13 CEC 14 Reserved (N.C. on device)
15 SCL 16 SDA
17 DDC/CEC Ground 18 +5V Power
19 Hot Plug Detect
• CVI input: YPbPr with R/L Cinch audio in.
• AV input: S-Video, CVBS Cinch video and R/L Cinch audio in.
• Speaker output: 10 7 w (at 8ohm) stereo output snap type connectors.
• RS232: DB9 RS232 male type connector.