157
TMDS channel:
¾ Carries audio, video and auxiliary data.
¾ Signaling method: According to HDMI Ver. 1.3b specification. (Type A HDMI).
¾ Video pixel rate: 25 MHz to 165 MHz (Type A)
¾ Pixel encodings: RGB 4:4:4, YCbCr 4:2:2, YCbCr 4:4:4.
¾ Audio sample rates: 32 kHz, 44.1 kHz, 48 kHz,
¾ Audio channels: up to 2.
DDC channel:
¾ Allows source to interrogate capabilities of sink.
¾ I²C signaling with 100 kHz clock.
¾ E-EDID data structure according to EIA/CEA-861B and VESA Enhanced EDID.
Content protection:
¾ According to High-Definition Content Protection (HDCP) Specification 1.10.
Audio input Sensitivity 500mVrms, the amplifier outputs full power when the input level reaches
500mVrms, terminated with input impedance of >10kΩ.
Speaker output Back firing speakers 2 x 7 Wrms, with T.H.D. < 10%.
No signal input While no signal at external inputs, screen goes black before entering standby mode.
2.3 DDC channel
• E-EDID data structure according to VESA Enhanced EDID 1.3 (and EIA/CEA-861B for HDMI).
• Allows source to interrogate capabilities of the Display & AV inputs.
• Separate EDID for VGA input and HDMI input.
2.3.1 EDID content for Analog
N/A
2.3.2 EDID content for Digital
N/A
2.3.3 Supported DDC/CI Commands
N/A
2.4 Service mode
Detailed technical specification refers to Service delta technical specs.
• Software Update:
¾ Through RS-232/VGA
2.5 Power Supply
2.5.1 Power Supply Features
• AC line voltage range - 90Vac ~ 264Vac.
• AC line frequency range - 50/60 Hz ± 3 Hz.
• DC tact switch - Minimal power consumption when switch off
• AC mains switch - No power consumption when switch off.
• Inrush current - < 40A at 240Vac when cold start.
• Leakage current - < 0.5mA at 240Vac.
• Power factor correction - According to EN61000-3-2
To Next Page
Loading...
