User Manual BDL5545E
2
Read and follow these instructions when connecting and using your display:
z Unplug the display if you are not going to use it for an extensive period of time.
z Unplug the display if you need to clean it with a slightly damp cloth. The screen many be wiped
with a dry cloth when the power is off. However, never use alcohol, solvents or
ammonia-based liquids.
z Consult a service technician if the display does not operate normally when you have followed the
instructions in this manual.
z The casing cover should be opened only by qualified service personnel.
z Keep the display out of direct sunlight and away from stoves or any other heat source.
z Remove any object that could fall into the vents or prevent proper cooling of the display’s
electronics.
z Do not block the ventilation holes on the cabinet.
z Keep the display dry. To avoid electric shock, do not expose it to rain or excessive moisture.
z If turning off the display by detaching power cable or DC power cord, wait for 6 seconds before
attach the power cable or DC power cord for normal operation.
z To avoid the risk of shock or permanent damage to the set do not expose the display to rain or
excessive moisture.
z When positioning the display, make sure the power plug and outlet are easily accessible.
z IMPORTANT: Always activate a screen saver program during your application. If a still, high
contrast image remains on the screen for an extended period of time, it may leave an
‘after-image’ or ‘ghost image’ on the front of the screen. This is a well-known phenomenon that
is caused by the shortcomings inherent in the LCD technology. In most cases the afterimage
will disappear gradually over a period of time after the power has been switched off. Be aware
that after-image cannot be repaired and is not covered under warranty.
To Next Page
Loading...
