15
2 Remove the two transport screws on the
top of the unit.
3 Remove the mounting sleeve with the
removal keys.
4 Install the sleeve into the dashboard and
bend the tabs outward to Àx the sleeve.
If the unit is not Àxed by sleeve but
by the supplied screws, skip this step.
Mount in the dashboard
Note
For proper operation of the DVD player, the
chassis must be mounted within 20 degree
horizontal. Ensure that the unit is mounted
within this limitation.
1 Ensure that car dashboard opening is
within these measurements:
183 mm
53.5mm
5mm
English
EN
To Next Page
Loading...
