Philips Efficia CM Series - Intended Use and Indications for Use

Intended Use/Indications for Use
Overview
1-2 Efficia CM Series Rack and Modules Instructions for Use
Intended Use/Indications for Use
The Efficia rack works with the Efficia CM12, CM120 and CM150 patient monitors and is
indicated for use by healthcare professionals whenever there is a need for monitoring the
physiological parameters of patients. Intended for monitoring, analysis, recording and
alarming of multiple physiological parameters.
The Efficia rack connects to the following Efficia modules:
• Dual IBP
• BISx and BISx4
• Multi-Gas with O2 and dual agent automatic identification.
• Multi-Gas without O2 and with manual agent identification.
•CO
2
(Oridion Microstream™)
The Efficia rack and modules require Efficia CM Series patient monitors running software
version C.00 or above. If the Software Version displayed in the System Menu is not C.00
or above, contact your system administrator.
The Efficia modules should be used in healthcare environments for the patient types
listed below. Additionally, the monitors and modules may be used in transport situations
within a healthcare facility.
For more information about the Efficia Series patient monitors (CM10, CM12, CM100,
CM120 and CM150), refer to the Efficia Series Instructions for Use (PN 453564622811).
Normal operating conditions include electromagnetic interference, which is deemed a
typical characteristic of the clinical environment.
Cautions • Keep these Instructions for Use accessible to all users.
• Users should use the patient monitor and optional modules for the intended use
and observe all WARNING and CAUTION statements throughout this book.
• The patient monitor, rack and modules should be used by qualified personnel.
• Do not tamper or unnecessarily modify this device or accessories.
Module/Parameter
Patient Types
Adult Pediatric Neonatal
Module 1: BIS
(BISx or BISx4)

Module 2: Dual IBP 
Module 3: Multi-Gas with O2 and
dual agent auto detection.

Module 3: Multi-Gas without O2
and detects one agent.

Module 4: CO
2
(Oridion
Microstream™)
