Philips Efficia CM Series - Preparing to Use the Gas Measurement; Removing Exhaust Gases

Preparing to use the Gas measurement
Monitoring Anesthetic and Respiratory Gases
6-6 Efficia CM Series Rack and Modules Instructions for Use
Preparing to use the Gas measurement
Components
Verify that you have all necessary components. For a Gas measurement you will need:
• Efficia Monitor and Rack
• Gas Measurement Module
• Sample Line
Removing Exhaust Gases
Figure 6-3 Gas Module
Warning To prevent the risk of inaccurate gas measurement values or exposing bystanders to
anesthetic gases, always connect the gas exhaust of the monitor and measurement
module and the anesthesia machine to the scavenging system. Do not return the gases to
the breathing system.
Notes
• The flow of gas is irreversible.
• Avoid negligent placement of device components, such as the sampling line, cables, etc.
WaterLock
Gas Sample Line
Exhaust connector