Philips Efficia CM Series - Configuring Waveform Settings; Changing the Sweep (Waveform) Speed; Changing the Waveform Size

Configuring Waveform Settings
Monitoring Anesthetic and Respiratory Gases
6-10 Efficia CM Series Rack and Modules Instructions for Use
Configuring Waveform Settings
Changing the Sweep (Waveform) Speed
The Sweep Speed determines the speed at which the waveform is drawn across the
screen. Options are:
• 3.125 mm/s
• 6.25 mm/s
• 12.5 mm/s
• 25.0 mm/s
To change the Gas waveform speed:
Changing the Waveform Size
If the displayed Gas waveform is too small or is clipped, use the Scale menu item to
adjust the size of the waveform. Options are:
Step
1
Open the waveform menu.
2
Select the Sweep Speed menu item.
3
Select a speed option.
4
Close the menu.
Anesthetic Scale Options Scale Options Scale Options
O2
• 0—25%
• 0—50%
• 0—100%
N
2
0
• 0—25%
• 0—50%
• 0—100%
OR
• 0.0—0.2 MAC
• 0.0—0.5 MAC
• 0.0—1.0 MAC
CO2
• 0.0—50.0 mmHg
• 0.0—75.0 mmHg
• 0.0—100.0 mmHg
OR
• 0.0—6.6%
• 0.0—9.9%
• 0.0—13.2%
OR
• 0.0— 6.7 kPa
• 0.0— 10.0 kPa
• 0.0— 13.3 kPa
AGT / AGT2
• 0—2%
• 0—5%
• 0—10%
• 0—20%
OR
• 0.0—0.5 MAC
• 0.0—1.0 MAC
• 0.0—2.0 MAC
• 0.0—5.0 MAC