Philips Efficia CM Series - Mounting the Rack

Basic Operation
Efficia CM Series Rack and Modules Instructions for Use 2-3
The Rear Panel
For the following Rack and Module technical alarms, after pressing the alarm silence key,
all sound, alarm message and background flashing will end, and the alarm will be
dismissed:
To learn more about Efficia alarms, see Chapter 3 of the Efficia CM Series Patient Monitor
Instructions for Use.
Mounting the Rack
The Rack can be mounted using a variety of mounting accessories, including:
• Roll Stand (Philips PN 989803199711)
• Wall Mount Kit (989803198311), which is used with the Efficia Wall Mount (Philips PN
989803195571)
• Bed Post/Rail Clamp (Philips PN 989803199711)
For information about mounting the rack on the roll stand or wall mount, see the
Instructions for Use that comes with the mounting hardware.
• BIS Device Disconnected • Rack Disconnected
• BIS Sensor Disconnected • Module Disconnected: <Module Name>
• BIS Sensor Invalid
• BIS SQI Under 50%
• BIS L SQI Under 50%
• BIS R SQI Under 50%
• BIS SQI Too Low
• BIS L SQI Too Low
• BIS R SQI Too Low
• Check BIS Sensor
• BIS Sensor Error, Detach/Reattach