Philips Efficia CM Series - 2 Basic Operation; Front and Rear Panel Components

Basic Operation
Efficia CM Series Rack and Modules Instructions for Use 2-1
2
Basic Operation
This chapter describes how to begin using the Efficia rack with the Efficia CM Series
monitors.
For information on using the Efficia CM Series monitors, see the Efficia CM Series
Instructions for Use.
The Front Panel
The following picture displays the module slots, buttons and the power indicator on the
Efficia rack.
Efficia Rack Front Panel
Figure 2-1 Efficia Rack Front Panel
The rack has four (4) plug-in slots and four (4) ejection buttons for removing plug-in
modules. The Gas module occupies two slots in the Rack.
An LED displays rack power and status. A green light on the Power indicator means that
the rack is powered and communicating with the monitor. A blue light means that the
rack is powered but has no communication with the monitor.
power
Indicator
module eject buttons