Philips HTS3371D - Page 37

[EasyLink Setup]
If this Home Theater System is connected
to HDNI CEC compliant TV/devices, all
connected devices can respond to the
following commands simultaneously:
Option
[EasyLink]
[One Touch
Play]
[One Touch
Standby]
[System
Audio
Control]
[Audio Input
Mapping]
Description
Turns off or on all EasyLink
features.
To disable this feature, select
[off],
When you press PLAY, the
TV and Home Theater System
are turned on. Disc play starts
if there is a disc in the Home
Theater System,
To disable this feature, select
[off],
When you press and hold
STANDBY for at least three
seconds, connected HDMI
CEC devices simultaneously
switch to standby.
To disable this feature, select
[off],
When you play audio that is
routed from the connected
devices, this Home Theater
System switches to the
corresponding audio source
automaticall 7.
To enable this feature, select
[On]. Then proceed to [Audio
Input Mapping] to scan and
map all the connected devices.
When you map the audio
input correctl 7, this Home
Theater System switches to
the audio from the played
device automatical 17.
• You mustturn on the HDNI CEC operations on
the TV/devices before you can enjoy the EasyLink
controls, See the TV/devices manual for details,
Philips does not guarantee 100% interoperability
with all HDMI CEC compliant devices,
38 EN
[Disc Lock]
Sets play restriction for a specific discs.
Before you start, place the disc in the disc
compartment (maximum 40 discs can be
locked).
- [Locl<] Restricts access to the current
disc. Once activated, a password is
needed to unlock and play the disc.
- [Unlock] Plays all discs.
You can set or change the password (see 'Adjust
settings'> 'Preferences'> [Password]),
[Display Dim]
Changes the brightness level of the display
panel on this Home Theater System.
- [100%] Normal brightness.
- [70%] Medium brightness.
- [40%] Dimmest display.
[OSD Language]
Selects the default on-screen menu language.
[Screen Saver]
Turns off or on the screen saver mode. Helps
to protect the TV screen from being damaged
due to over exposure to a static image for too
long.
" [On] Sets the screen saver to appear
after 5 minutes of inactivity (for example,
in pause or stop mode).
- [Off] Disable screen saver mode.
[Sleep Timer]
Switches to standby automatically after the
preset time.
" [15 mins], [30 mins], [45 mins], [60 mins]
Selects the count down time before
the Home Theater System switches to
standb 7.
- [Off] Disables sleep timer mode.