[HDMI Setup]
Selectsthe HDMI video settingwhen you
connect this Home Theater Systemandthe
TV with a HDPII cable,
[Wide Screen Format] Defines the
wide screen format for disc play.
Option Description
[Superwide] Center position of the
screen is stretched
less than the side,
Applicable only to
72_0p and above video
resolution setting.
[4:3 Pillar No stretching of the
Box] picture. Black bars are
displayed on both sides
of the screen.
[Off] Picture is displayed
according to the format
of the disc.
• If the setting is not compatible with your TV, a blank
screen appears, Wait for 15 seconds for auto recover
or switch to its default mode as follows: 1) Press _A,Z)
Press 4, 3) Press ZOOM,
[Closed Caption]
Turns off or on display captions.
- [On] Shows the sound effects in
subtitles. Applicable only to discs with
Closed Caption information included and
the TV supports this feature.
- [Off] Disables closed caption.
[Progressive]
If the TV supports progressive scan output,
you can turn on the progressive scan mode to
enhance the picture quality, Video connection
through Component Video is required.
- [On] Turns on progressive scan mode.
- [Off] Disables progressive scan mode.
This setting is only available if you have set the [TV
Display] setting to [16:9 Wide Screen],
[HDMI Video] Selects the HDDII video
output resolution that is compatible with
your TV display capability.
[480i], [576i],
[480p], [576p],
[720p], [1080i],
[1080p]
Option Description
[Auto] Detects and selects
the best supported
video resolution
automatical 17,
Selects a video
resolution that is best
supported b7 the TV,
See the TV manual for
details,
There is more detailed description available (see 'Get
started' > 'Turn on Progressive Scan'),
4l EN
To Next Page
Loading...
