7 INTERIM RESULTS
At this point
– generator parts and units
– tube(s)
– HV cables
have been checked.
Something might have been exchanged or all tests came to an OK-result.
▪ Remove the extender PCB and reinsert kV-control EZ130.
WARNING
All followings checks must be made with mains power.
Check that the converter mains lines still have no connection
to mains at ENK1 :1, :3, :5
▪ Switch ON all generator breakers and the mains supply.
Converter test kit OPTIMUS for OPTIMUS 50/65/80 gen‐
erators release 3.x with converters 4512 104 7231x
Conv test Optimus CSIP Level 1 (08.0)
© 2008 Koninklijke Philips Electronics N.V.
ALL RIGHTS RESERVED
17
To Next Page
Loading...
