Philips Optimus - Page 5

9 kV-driver test ....................................................................................................................... 19
10 Tube check with Rotor Control Part 2 .................................................................................. 24
11 Tube and high-voltage cable test with high voltage ............................................................. 25
12 Measuring of primary currents ............................................................................................. 29
12.1 Measuring of the resonance frequency .............................................................................................. 33
12.2 Measurement of kV behavior with an adapted tube ........................................................................... 34
12.3 Measuring of kV behavior with a non-adapted tube (Optimus 65/80) ................................................ 35
13 Reconditioning of the tube(s) ............................................................................................... 37
14 Final system test .................................................................................................................. 40
15 Appendix .............................................................................................................................. 41
15.1 Alignment of function unit kV .............................................................................................................. 41
15.1.1 General information ............................................................................................................................ 41
15.1.1.1 Connecting and setting the scope ...................................................................................................... 42
15.1.1.2 Deactivating the kV controller ............................................................................................................. 43
15.1.1.3 Setting of exposure data .................................................................................................................... 43
15.1.1.4 Adjustment of the factor for duty cycle ............................................................................................... 43
15.2 Tube conditioning ............................................................................................................................... 45
15.2.1 General Information ............................................................................................................................ 45
15.2.2 Preconditions / Program settings ....................................................................................................... 46
15.2.3 Procedure ........................................................................................................................................... 47
15.3 List of checked parts of generator S/N ............................................................................................... 51
15.4 List of checked parts of generator S/N ............................................................................................... 52
15.5 List of checked parts of generator S/N ............................................................................................... 53
Converter test kit OPTIMUS for OPTIMUS 50/65/80 gen‐
erators release 3.x with converters 4512 104 7231x
Conv test Optimus CSIP Level 1 (08.0)
© 2008 Koninklijke Philips Electronics N.V.
ALL RIGHTS RESERVED
5