62 5756B
Upgrading the Controller Board Firmware
The firmware (integrated software on the controller board)
can be upgraded using the serial diagnostic and configuration
interface "RS-232" (for the connection of a PC). Such
firmware updates are used exclusively for the addition of new
functions that are implemented within the scope of continuous
product improvement. No update is required for normal
system operation.
When updating the controller board, please refer to your
nearest Phoenix Contact representation.
Connecting Cable
Connect the remote bus cable to the remote bus interface of
the controller board using a 9-pos. D-SUB female connector.
An adapter for converting to optical fibers as the transmission
medium can also be connected in this way. The following
pages provide further information about connector assembly
and possible optical fiber connections.
To Next Page
Loading...
Need help?
General
