Phonic IS16v1 User Manual

17
IS16
English
3. Faders
3.1 Channel Tab
3.1.1 Channel Select
Select this button to choose the channels that are displayed on
screen.Userscanselectchannels 1 through4,5through8,9
through12,or13through16.
3.1.2 Channel Off/On Button
Push this button to activate and deactivate the corresponding
channel.
3.1.3 Solo Button
Pushing the solo button will send the corresponding channel to
theControlRoommix.Ifachannelissetto’solosafe’,theword
SAFE will appear within this button. This means the channel will
still be sent to the main mix when soloed. Check section 1.3.2 for
more information.
3.1.4 Pan Control
Thiscontrolwilladjustthelevelofsignalthatissenttotheleftand
right channels of the main mix.
3.1.5 Channel Fader
Thisfaderwilladjustthenaloutputlevelofthecorresponding
channel. Users are able to use the virtual faders or the faders
located on the mixing console itself.
3.1.6 Level Meter
The levels of the current signal will be displayed here.
3.1.7 Meter Pre/Post Button
Thisbuttonchangesthechannel’smeterbetweenthatofapre-
fadermetertoapost-fader,meter.
3.1.8 To Main Button
Activating this button will send the channel to the main stereo mix.
3.1.9 USB/FireWire Button
Pushingthisbuttonwillreplacethecurrentlyselectedchannel’s
signal with the corresponding signal returned from your
digital audio workstation software. The icon on this button will
automatically change depending on the type of connection
detectedbytheIS16(FireWireorUSB).
3.1.10 Invert Phase
Activating this button will invert the phase of the corresponding
channel.
3.2 AUX & Group Tabs
TheAUXandGrouptabsintheFaderfunctionare,forallintents
andpurposes,thesame.Thissectionwillcombinethetwo.
3.2.1 Channel Select
Push this button to bring up the range of channels you wish to
view the properties of. Users can select 1 through 4 or 5 through 8.
3.2.2 Channel On/Off Button
Selectthisbuttontoactivate/deactivatethecorrespondingAUX
or Group channel.
3.2.3 Solo Button
Pushing this button will SOLO the corresponding channel.
WhenthewordSAFEappearswithinthebutton,thismeansthe
correspondingAUXorGroupmixhasbeensetto’safesolo’and
will still be sent to the main mix when soloed.
3.2.4 Pan Control (Group Tab only)
Thiscontroladjuststhelevelofthesignalwillbesenttotheright
and left channels of the Main mix.
3.2.5 Level Fader
Thisfaderwilladjustthenaloutputlevelofthecurrentlyselected
AUXorGroupchannel.Usersareabletousethesevirtualfaders,
or can also opt to use the faders located on the mixing console
itself(ensuretheMasteroptionisselectedinLayerMode).
3.2.6 Level Meter
The level meter will display the pre- or post-fader output signal for
the corresponding channel.
3.2.7 Meter Pre/Post Button
This button will turn the accompanying meter from post-fader to
a pre-fader.
3.2.8 To Main Button (Group Tab only)
Foundinthegrouptabonly,thisbuttonallowsuserstosendthe
corresponding group signal to the main mix.

Phonic IS16v1 Specifications

General

Brand	Phonic
Model	IS16v1
Category	Music Mixer
Language	English