Phonic IS16v1 - Page 31

27
IS16
English
10. Setup
10.1 Link/Pair
10.1.1 Link Mode
UsersareabletolinkthelevelcontrolsofanyoftheinputchannelstogetherusingtheLinkModefunction.Usersareabletolinkupto4
groupsofchannelstogether,andeachgroupiscolor-coded.ThelinkgroupsarelabelledA,B,CandDandarecoloredorange,green,
purpleandbrown,respectively.
Ifuserslinkchannelstogether,adjustingonefaderwithinthelinkgroupwillallowuserstocontrolalltheothers,whilemaintainingtheir
relative level differences.
10.1.2 Channel Pair
Activating pair mode on any combination of the channels will copy the fader settings and parameters from one channel to another. All
odd-numberedchannelscanhavetheirparameterscopiedovertotheevenlynumberedchannelsthatsucceedthem(orvise-versa).The
parameterscopieddonotincludetheinvertphaseorDAWfunctions.Pairedchannels’linkedparametersare:Select,On/Off,Panning,
Equalizer,Dynamics,EffectsandAUXSendOn/Off.
WithintheSetupmenu’sLink/Pairtabyouwillalsondthreeadditionalbuttons:IDV,GANGandINVGANG.“IDV”isshortfor“Individual”
andallowsuserstoadjustthepanningofeachchannelindependentofotherchannels,regardlessof“pair”settings.“GANG”willallow
userstoadjustthepanningoftwochannelssimultaneouslywhentheyarepairedtogether.“INVGANG”isshortfor“InverseGang”,and
allowsthepanningoftwochannelstobeadjustedsimultaneously,howeverinoppositedirections(fantasticforstereoinputs).