Phytec phyFLEX-i.MX 6 - Page 76

phyFLEX
®
-i.MX 6


In the Select Components window keep the default selection of the components and click
Next.



Proceed trough the license agreement and start the installation.

After the installation is finished make a symbolic link to easily start Qt Creator:
sudoln‐s/opt/x64_Qt5.3.2/Tools/QtCreator/bin/qtcreator.sh
/usr/bin/qtcreator.sh

Set the correct environment to our SDK:
sudovi/usr/bin/qtcreator.sh
70
 PHYTEC Messtechnik GmbH 2015 L-781e_7

Enter following line before #!/bin/sh:
./opt/yogurt/iMX6‐PD15.1.1/environment‐setup‐cortexa9hf‐vfp‐neon‐
phytec‐linux‐gnueabi