PIAGGIO Beverly 400 E5 - Removing the Intake Manifold

- Insert the flywheel fixing nut.
- Place the support plate.
Specific tooling
020916Y Magneto flywheel blocking tool
- Fit the specific tool.
- Tighten the flywheel fixing nut to the specified
torque.
Specific tooling
020627Y Flywheel lock tool
Locking torques (N*m)
Flywheel fixing nut 100 to 110
Removing the intake manifold
- The intake manifold is housed in the big end,
loosen the clamps to remove the sleeve.
Engine Beverly 400 E5
ENG - 120