Level check
Engine cooling is forced liquid circulation. The
coolant is composed of a mix of 50% demineral-
ised water and an ethylene glycol-based anti-
freeze with corrosion prevention components. The
coolant included with the scooter is already mixed
and ready for use.
For proper functioning of the engine, ensure that
the temperature of the coolant is maintained at
about 90°C.
When all the bars and the icon on the coolant level
indicator start flashing, stop the engine immedi-
ately, let it cool down and check the liquid level.
Check the fluid with cold engine according to the
scheduled maintenance table, in the way shown
below.
Bring the vehicle in vertical position on the stand
and open the front case.
Remove the expansion tank cap «A» rotating it
anticlockwise.
Maintenance Beverly 400 E5
MAIN - 56
To Next Page
Loading...
