Remove the brake pump cap and restore the rec-
ommended brake fluid level using the specified
product.
CAUTION
ONLY USE DOT 4-CLASSIFIED BRAKE FLUID.
CAUTION
BRAKE FLUID IS HYGROSCOPIC; THAT IS, IT ABSORBS
MOISTURE FROM THE SURROUNDING AIR. IF THE CON-
TENT OF MOISTURE IN THE BRAKE FLUID EXCEEDS A
CERTAIN VALUE, BRAKING WILL BE INEFFICIENT.
NEVER USE BRAKE LIQUID FROM OPEN OR PARTIALLY
USED CONTAINERS.
UNDER NORMAL CLIMATIC CONDITIONS, REPLACE FLU-
ID AS INDICATED IN THE SCHEDULED MAINTENANCE
TABLE.
CAUTION
BRAKE CIRCUIT FLUID IS HIGHLY CORROSIVE: DO NOT
LET IT COME INTO CONTACT WITH PAINTED PARTS.
CAUTION
AVOID CONTACT OF BRAKE FLUID WITH EYES, SKIN,
AND CLOTHING. IN CASE OF ACCIDENTAL CONTACT,
RINSE WITH WATER.
N.B.
SEE THE BRAKING SYSTEM CHAPTER WITH REGARD TO
THE CHANGING OF BRAKE FLUID AND THE BLEEDING
OF AIR FROM THE CIRCUITS.
Anti-evaporation system
The vehicle is equipped with the "Canister", main component of the system for the control of evaporative
emissions, compliant with the current standards.
A. Fuel pump
B. Fuel tank
C. Two-way fuel vapour ventilation valve
D.Canister
E.Air purge pipe into atmosphere
F.One-way electronic fuel vapour purge control
valve (controlled by ECU)
G. Vacuum fitting
H. Throttle body
I. Air induction fitting
L. Injector
Beverly 400 E5 Maintenance
MAIN - 61
To Next Page
Loading...
