Pilz PNOZ m B1 - Page 31

Commissioning
Operating Manual PNOZ m B1
1003790-EN-02
| 31
Display Example Description
Information
Ethernet
IP address:DHCP
169.254.60.1
Subnet mask:
255.255.0.0
Ethernet
Gateway:
0.0.0.0
Ethernet
Scan port:
10000
PG port:
9000
Display of the current Ethernet con-
figuration
Change
Ethernet
Info
Change
\..
Change Ethernet configuration...
Edit IP
Change IP address
Edit address
IP address:
169.
254 .060.001
Subnet mask:
255.255.255 .000
Gateway:
000.000.000 .000
} IP address
} Subnet mask
} Gateway
Adjust
-> Hold down multifunction switch for
2 s in order to access change mode
Edit ports
Change IP address
Edit ports
PG port: 9
00
1
Scan port:10000
Adjust PG port and scan port
-> Hold down multifunction switch for
2 s in order to access change mode
Use DHCP
Change IP address
Ethernet
Use DHCP
Edit ports
Use program
Obtain IP address automatically from
the network (prerequisite: Network
has a DHCP Server utility)
-> Hold down multifunction switch for
2 s in order to perform the action
Use program
Change IP address
Ethernet
Use program
Use DHCP
Use default
Load Ethernet settings from the act-
ive PNOZmulti project
-> Hold down multifunction switch for
2 s in order to perform the action