Pilz PNOZ m B1 - 2 Overview; Range; Unit Features; USB Memory

Overview
Operating Manual PNOZ m B1
1003790-EN-02
| 7
2 Overview
2.1 Range
} Base unit PNOZ m B1
} Terminator
} Documentation on data medium
} USB memory
2.2 Unit features
Application of the product PNOZ m B1:
Base unit of the configurable control system PNOZmulti 2
The product has the following features:
} Can be configured in the PNOZmulti Configurator
} Support for module programs
} 4 test pulse outputs to detect shorts between the inputs
} Backlit display for:
– Status information
– Device information
– Diagnostics
– Activate project
– Ethernet settings
– System's date and time
– Stop and start device
} Multifunction switch for menu control
} Ethernet interface with switch
} LED indicator for:
– Operating status
– Error messages
– Diagnostics
– Supply voltage
} Plug-in connection terminals:
Either spring-loaded terminal or screw terminal available as an accessory (see Order ref-
erences for accessories).
} Expansion modules can be connected
(please refer to the document "PNOZmulti System Expansion" for details of the type and
number that can be connected)
2.3 USB memory
To save and transfer projects you need the Pilz USB memory that is supplied with the
device (plugged into the device).