Appendix
System Description Service Robotics Modules
1004870-EN-05
| 121
14.1.3 Check the integrity of a file
You can determine the integrity of a file by comparing the hash value published by Pilz to
the hash value you created using one of the described methods. When the two values
match, the integrity is guaranteed to the state of the art, the downloaded file is acceptable
to use.
Note:
In principle it is sufficient to compare the starts and the ends of the two hash values. If you
want to be sure, you can make life easier and proceed as follows:
1. Open a file in a text editor (Windows Editor, for example)
2. Copy the hash value published by Pilz into the file.
3. Below this, copy the has value you calculated into the file.
View the values that are listed downward. A match or any optical differences can be de-
tected relatively fast.
To Next Page
Loading...
Need help?
General
