Pima FORCE Programming Guide

26
PIMA Electronic Systems
9 General Settings
Following are the parameters of the General Settings menu:
Parameter
Description
System Name
User text, up to 16 characters.
Service Provider
User text, up to 24 characters. To display the text, press and hold
the zero key.
Contract Expiration
Date to display appropriate message onscreen
Technician Code
Change code, 4-6 digits.
One Key Arming
Use the Arm Away, Home1 ( ) , and number keys to arm,
without a password.
Alarms at Arm
Alarm messages will be displayed when the control panel is armed.
Final Door Arming
Closing any delayed zone during the exit delay terminates the delay.
Home Modes-Instant
No exit delay when arming in Home 1-4 modes
Additional CMSs
• Selected: setting CMS 2 parameters + code is enabled
• Cleared: setting CMS 2 parameters + code is enabled only by
using the Master technician code.
Zone Bypass-Auto Arm
Open zones are automatically bypassed when auto-arming
Momentary Key
• Selected: momentary key switch
Cleared: toggle key switch
Keyfob-Force Arming
Allows arming with a keyfob with open zones and faults
Beep on Arming
• No beep
• Always: the siren will sound a beep, whenever the alarm system
is armed.
• With Key switch/Key fob: the siren will sound a beep, when the
alarm system is armed with a key switch or key fob.
Beep on Disarming
• No beep
• Always: the siren will sound 2 beeps, whenever the alarm
system is disarmed.
• With Key switch/Key fob: the siren will sound two beeps, when
the alarm system is armed with a key switch or key fob.
• Always+Alarm in Memory: the siren will sound three beeps,
whenever the alarm system is disarmed, if the alarm was
triggered when the system was armed.
• With Key Switch/Key fob+Alarm in Memory: the siren will sound
three beeps, whenever the alarm system is disarmed with a key
fob or key switch, if the alarm was triggered when the system
was armed.
Arming Prevention
See below.

Pima FORCE Specifications

General

Brand	Pima
Model	FORCE
Category	Security System
Language	English