10 Reset to Defaults
The
Reset to Defaults
menu includes the following sub-menus:
1) Select Parameters: select what parameters to reset from the following list:
▪ Communication (including the CMSs)
▪ Zones (and partitions)
▪ Outputs (onboard and expanders)
▪ User (all except the Master)
▪ Full System Reset - includes all the above.
2) Reset to Defaults: press to reset the selected parameters.
10.1 Resetting to factory defaults
If the Master technician code is unavailable, FORCE can nevertheless be reset to factory defaults.
To reset to the factory defaults, do the following:
1. Disconnect FORCE from AC and battery power for five seconds.
2. Reconnect AC power.
3. Within 30 seconds from when the main screen is displayed, press 000000 (six zeros). The
system reset screen is displayed.
4. Press on
Press and Wait
.
5. When the reset process is over, set new Master codes; see section 2.2, on page 4 for details.
6. Reconnect the battery.