HUNTER-PRO 32 Intruder Alarm System - Installation Manual
29
4.1.4 Programming Duress Code
This code is useful when the system is connected to a security
station. The Duress code will disarm the system (if armed) and
trigger the Silent Alarm, sending a duress signal to the security
station without activating the sirens. Note the code is between 4 to 6
digits:
Master Code /Enabled User Code
User Menu
Choose 1,2...
-OR-
User Code
User Menu
Choose 1,2...
The following screen will appear:
Master Code
ENTER/NEXT/END
(when using Master Code)
-OR-
User 1 *
ENTER/NEXT/END
(when using Enabled User Code)
X3
Duress Code
ENTER/NEXT/END
Enter new code (4 to 6 digits)
to save
Press
a number of times unit exiting to time/zone screen
4.1.5 Programming Door Code
Arms and disarms a system’s relay. Useful for opening and closing
electric gates, activating video cameras, and more. The code can be
To Next Page
Loading...
