Pioneer PDP-507CMX - Page 181

PDP-507CMX
181
5678
56
7
8
C
D
F
A
B
E
[QPI]: To acquire data on the integrator/PICTURE information
Order Data Contents Size Remarks
1 STX 1Byte 02hex
2 Command echo back 3Byte QPI (fixed)
3 CONTRAST 3Byte 000 - 255 Note 1
4 BRIGHTNESS 3Byte 000 - 255 Note 1
5 C,DETAIL R (RED) 3Byte 000 - 060 Note 1
6 C,DETAIL Y (YELLOW) 3Byte 000 - 060 Note 1
7 C,DETAIL G (GREEN) 3Byte 000 - 060 Note 1
8 C,DETAIL C (CYAN) 3Byte 000 - 060 Note 1
9 C,DETAIL B (BLUE) 3Byte 000 - 060 Note 1
10 C,DETAIL M (MAGENTA) 3Byte 000 - 060 Note 1
11 H.ENHANCE 3Byte 000 - 015 Note 1, 2
12 V.ENHANCE 3Byte 000 - 015 Note 1, 2
13 COLOR 3Byte 000 - 127 Note 1, 3
14 TINT 3Byte 000 - 060 Note 1, 3
15 SHARPNESS 3Byte 000 - 015 Note 1, 3
16 Main input function 3Byte As the same contents as item 9 of QST command
17 Man screen size information 1Byte As the same contents as item 11 of QST command
21 Check sum 2Byte
22 ETX 1Byte 03hex
Note 1 : When the type of signal is not settled, dummy data are output.
Note 2 : Dummy data are output at video signal input.
Note 3 : Dummy data are output at PC signal input.
[QWB]: To acquire data on the integrator/WHITE BALANCE information
Order Data Contents Size Remarks
1 STX 1Byte 02hex
2 Command echo back 3Byte QWB (fixed)
3 R.HIGH 3Byte 000 - 255 Note 1
4 G.HIGH 3Byte 000 - 255 Note 1
5 B.HIGH 3Byte 000 - 255 Note 1
6 R.LOW 3Byte 000 - 255 Note 1
7 G.LOW 3Byte 000 - 255 Note 1
8 B.LOW 3Byte 000 - 255 Note 1
9 Main input function 3Byte As the same contents as item 9 of QST command
10 Man screen size information 1Byte As the same contents as item 11 of QST command
11 Check sum 2Byte
12 ETX 1Byte 03hex
Note 1 : When the type of signal is not settled, dummy data are output.
[QPS]: To acquire data on the integrator/SCREEN information
Note 1 : When the type of signal is not settled, dummy data are output.
Note 2 : Dummy data are output at DVI or video signal input.
Order Data Contents Size Remarks
1 STX 1Byte 02hex
2 Command echo back 3Byte QPS (fixed)
3 H.POSITION 3Byte 000 - 255 Note 1
4 V.POSITION 3Byte 000 - 255 Note 1
5 H.SIZE 3Byte 000 - 064 Note 1
6 V.SIZE 3Byte 000 - 064 Note 1
7 CLOCK 3Byte 000 - 255 Note 1, 2
8 PHASE 3Byte 000 - 031 Note 1, 2
9 Main input function 3Byte As the same contents as item 9 of QST command
10 Man screen size information 1Byte As the same contents as item 11 of QST command
21 Check sum 2Byte
22 ETX 1Byte 03hex