251
Integrator Mode
PIP SIZE
Select the size of the PICTURE IN PICTURE sub-screen.
Note
It is also reflected in the sub-screen size when PIP has been set by “5.3.4 Adjustments and setting in the Menu
Mode: 13) SPLIT FREEZE Setting (pg. 188)”, “5.3.7 Adjustments and setting in the Menu Mode: 21) SPLIT FREEZE
Setting (pg. 213)”.
FADE PIP
If it is set to ON, it is possible to fade in/fade out (gradually appear/disappear) the sub-screen of Picture-in-picture.
Fade in occurs when the sub-screen has changed from no input to a signal.
It is possible to perform fade in/fade out with an RS-232C command at optional times. For details, refer to “5.5.5 List
of RS-232C Commands (pg. 267)”.
Note
It also operates during BANNER PIP.
PDP-507CMX
PDP-427CMX
B
B
B
B
A
A
A
A
256
(256)*
256
(192)*
330
(330)*
480
(480)*
330
(248)*
480
(360)*
405
(405)*
405
(304)*
*: Numbers in ( ) represent a case of 16:9 contents.
PIP1
PIP2
PIP3 PIP4
B
B
B
B
A
A
A
A
340
(340)*
256
(192)*
440
(440)*
640
(640)*
330
(248)*
480
(360)*
540
(540)*
405
(304)*
*: Numbers in ( ) represent a case of 16:9 contents.
PIP1
PIP2
PIP3 PIP4
To Next Page
Loading...
