The Advanced MCACC menu
07
43
En
Chapter 7:
The Advanced MCACC menu
Making receiver settings from the
Advanced MCACC menu
The Advanced MCACC (Multi Channel ACoustic
Calibration) system was developed in Pioneer’s
laboratories with the aim of making it possible for home
users to perform adjustments of the same level as in a
studio easily and with high precision. The acoustic
characteristics of the listening environment are
measured and the frequency response is calibrated
accordingly to allow high precision, automatic analysis
and optimal calibration of the sound field to bring it
closer to a studio environment than ever before.
Furthermore, while it was previously difficult to eliminate
standing waves, this receiver is equipped with a standing
wave control function using a unique process to perform
acoustic analysis and reduce their in
flu
ence.
This section describes how to calibrate the sound field
automatically and fine-adjust the sound field data
manually.
1 Switch on the receiver and your TV.
Use RECEIVER to switch on.
1
•If headphones are connected to the receiver,
disconnect them.
2 Set the operation selector switch to
RCV
, then press
HOME MENU
.
2
An on-screen display (OSD) appears on your TV. Use /
// and ENTER to navigate through the screens
and select menu items. Press RETURN to confirm and
exit the current menu.
•Press HOME MENU at any time to exit the HOME
MENU.
3Select ‘
Advanced MCACC
’ from the
HOME MENU
,
then press
ENTER
.
4 Select the setting you want to adjust.
• Full Auto MCACC – See Automatically setting up for
surround sound (MCACC & Full Band Phase Control)
on page 9 for a quick and effective automatic
surround setup.
• Auto MCACC – See Automatic MCACC (Expert) on
page 44 for a more detailed MCACC setup. In
addition, the Full Band Phase Control function
calibrates the frequency-p hase characteristics of the
connected speakers.
• Manual MCACC – Fine-tunes your speaker settings
and customize the Acoustic Calibration EQ (see
Manual MCACC setup on page 46).
• Demo – No settings are saved and no errors occur.
When the speakers are connected to this receiver,
the test tone is output repeatedly. Press RETURN to
cancel the test tone.
1Make sure not to switch off the power when using the HOME MENU.
2 You can’t use the HOME MENU when the HOME MEDIA GALLERY input source is selected (in either the main or sub zone). When you set
ZONE 2, ZONE 3 or ZONE 2&3 to ON (page 65), you can’t use the HOME MENU.
DVD
RECEIVER SOURCE
MAIN
MULTI
OPERATION
ZONE2 3
VIDEO1
GALLERY
HOME MEDIA
INPUT SELECT
CD
HDMI
TUNER
PHONO
VIDEO2 VIDEO3
TV
BD DVR1 DVR2
CD-R
RECEIVER
AUDI O
PARAMETER
TOP MENU
BAND
iPod CTRL
PTY
SEARCH
EXIT
TOOLS
STATUS PHASE CTRL CH LEVEL
MENU
T.EDIT
VIDEO
PARAMETER
SOURCE
TV RCV
INPUT MUTE MUTE
VOL
VOL
TV CONTROL
CH
RETURN
TUNE +
TUNE
ST ST +
HOME
MENU
RETURN
ENTER
SOURCE
TV RCV
1. Advanced MCACC
2. MCACC Data Check
3. Data Management
4. System Setup
Exit Return
HOME MENU
A/V RECEIVER
a. Full Auto MCACC
b. Auto MCACC
c. Manual MCACC
d. Demo
1.Advanced MCACC
A/V RECEIVER
Exit Return
SCLX81_71.book 43 ページ ２００８年７月２５日 金曜日 午後３時１分
To Next Page
Loading...
Need help?
General
