Pioneer SC-LX81 Operating Instructions

The System Setup menu
08
59
En
1 Select ‘ THX Audio Setting ’ from the Manual SP
setup menu.
2 Select either
ON or OFF for THX Loudness Plus
setting.
3 Specify the distance of your surround back speakers
from each other.
• 0–0.3 m – Surround speakers within 30 cm apart.
• >0.3– 1.2 m – Surround speakers between 30 cm and
1.2 m apart.
• 1.2 m< – Surround speakers more than 1.2 m apart
(default).
4 Specify whether your subwoofer is THX Ultra2/
Select2
1
certified or not.
If your subwoofer isn’t THX Ultra2/Select2
1
certified, but
you still want to switch boundary gain compensation on,
select YES here, but the effect might not work properly.
5 Select either ON or OFF for Boundary Gain
Compensation setting.
6 When you’re finished, press
RETURN .
You will return to the Manual SP Setup menu.
Note
1Ultra2 for the SC-LX81, Select2 for the SC-LX71.
4a.Manual SP Setup
A/V RECEIVER
Exit Return
1. Surr Back System
2. Speaker Setting
3. Channel Level
4. Speaker Distance
5. X-Curve
6. THX Audio Setting
A/V RECEIVER
Exit Finish
Loudness Plus : ON
SB SP Position : 1.2 m<
BGC : OFF
THX Ultra2 SW : YES
4a6.THX Audio Setting
A/V RECEIVER
Exit Finish
4a6.THX Audio Setting
Loudness Plus : ON
SB SP Position : 1.2 m<
BGC : OFF
THX Ultra2 SW : YES
A/V RECEIVER
Exit Finish
4a6.THX Audio Setting
Loudness Plus : ON
SB SP Position : 1.2 m<
BGC : OFF
THX Ultra2 SW : YES
Loudness Plus : ON
SB SP Position : 1.2 m<
BGC : OFF
THX Ultra2 SW : YES
A/V RECEIVER
Exit Finish
4a6.THX Audio Setting
SCLX81_71.book 59 ページ ２００８年７月２５日 金曜日 午後３時１分

Pioneer SC-LX81 Specifications

General

Brand	Pioneer
Model	SC-LX81
Category	Receiver
Language	English