Pixsys ATR 401 - Confi Guration; Modify Confi Guration Parameters

30 ATR401 - User manual
Modbus
address
Descrizione Read Write
Reset
value
1111 Percentage heating output (0 -100) R/W 0
1112 Percentage cooling output (0-1000) RO 0
1113 Percentage cooling output (0-100) RO 0
2001 Parameter 1 R/W EEPROM
…. …. R/W EEPROM
2100 Parameter 100 R/W EEPROM
4001 Parameter 1** R/W EEPROM
…. …. R/W EEPROM
4100 Parameter 100 R/W EEPROM
5001 Remote setpoint (see par 7.3) W 0
11 Con guration
11.1 Modify con guration parameters
For con guration parameters see next paragraph.
Press Display Do
1
PRGM
for 3
sec.
Display 1 shows
 with the
1st digit  ashing, while display
2 shows 
2
Modify  ashing digit and
move to next digit with
SET
.
Enter password

3
PRGM
for
conf.
Display 1 shows  rst parameter
and second display shows its
value.
4
Scroll parameters.
5
PRGM
Allows to switch from
mnemonic parameter code to
numeric code and viceversa
(ex: from  to ).
**
I parametri modi cati usando gli indirizzi seriali dal 4001 al 4100, vengono salvati in EEPROM
solamente dopo 10” dall’ultima scrittura di uno dei parametri.