Pixsys ATR 621 series - Page 44

44 ATR 621 - User manual
81  Serial Delay
Select serial delay.
0…100 ms. > Default: 20ms.
82   Conversion Filter
Adc  lter: number of means on analogue-digital conversion.
1…15 samplings > Default: 10.
83  Visualization Filter
   (Disabled)
 (Pitchfork  lter) > Default.
     (First Order)
    (First Order with Pitchfork)
   (2 Samples Mean)
   (3 Samples Mean)
  (4 Samples Mean)
   (5 Samples Mean)
   (6 Samples Mean)
    (7 Samples Mean)
   (8 Samples Mean)
   (9 Samples Mean)
 (10 Samples Mean)
84  Retransmission
Retransmission for analogue output. Parameters 86 and 87 de ne
upper/lower limit of scale
   (Disabled). > Default.
  (Command Setpoint) Retransmit the command setpoint.
 (Process) Retransmit the process.
85   Retransmission Type
Select retransmission signal type.
 (0…10V)
 (0…20mA)
 (4…20mA) > Default.
86    Lower Limit Retransmission
Lower limit analogue output range.
-999…+9999 [digit
4
] (degrees.tenths for temperature sensors). > Default: 0.