Pixsys ATR620 - ATR620 Memory Card Operations

73
Press Display Do
5
Red display shows
, green display
shows value of parameter
6
Increase / decrease number
of parameter
Visualize number of
parameter which must
be modified
7
Green display shows the
flashing value of selected
parameter.
8
Increase / decrease value
of visualized parameter.
Enter new value
9
Value of parameter stops
flashing
To modify other
parameters go back to
point 6.
10
End of configuration.
The controller is in
mode.
** If Memory Card is
connected, its values will be
up-
dated with new data
within a few seconds.