Pixsys ATR620 - Starting and Managing ATR620 Cycles; Cycle Start and Delayed Start Programming

66
27 Start of a cycle
27.1 Cycle start and programming of delaied start
Red display shows .
Press Display Do
1
Red display shows
available cycles
2
Increase or decrease
until the chosen cycle is
visualized
(for cycle no.1),
(for cycle
no.2)...
3
or
Cycle starts. Buzzer
rings. Green display
shows process value, red
display shows the value
which has been selected
on P-51, 1
st
digit
If function “Delayed start” is enabled (see P-01, 2
nd
digit)
follow the table below
4
or
Red display shows
, green display
shows flashing the
programmed time.
5
Increase or decrease the
waiting time after cycle
Start (Hours:Minutes).
6
Start of waiting time. At
elapsing of programmed
time, cycle will start..
Press to modify
time value