PLANET Technology Corp. GRT-101/401/402 User’s Manual
With Dynamic Routing, you can enable GRT series to automatically adjust to
physical changes in the network’s layout. The Cable/DSL Firewall Router,
using the RIP protocol, determines the network packets’ route based on the
fewest number of hops between the source and the destination. The RIP
protocol regularly broadcasts routing information to other routers on the
network.
Click Route to modify the routing information.
To modify the RIP (Routing
information protocol) Parameters:
RIP Mode: Enable
Auto RIP Summary: Enable
Press Modify
- -
25
To Next Page
Loading...
Need help?
General
