Planet GS-5220-16S8C Command Guide

Command Guide
-173-
Switch# configure terminal
Switch (config)# interface vlan X
Switch (config-if-vlan)# end
Switch#
4.2.66.3 exit
Command:
exit
exit Exit from current mode
Default:
None
Usage Guide:
To exit current mode
Example:
To exit current mode.
Switch# configure terminal
Switch (config)# interface vlan X
Switch (config-if-vlan)# exit
Switch (config)#
4.2.66.4 ip address
Command:
ip address <ipv4_addr> <ipv4_netmask>
ip Interface Internet Protocol config commands
address Address configuration
<ipv4_addr> IP address
<ipv4_netmask> IP netmask
Default:
None
Usage Guide:
To configure IP address mode for specific VLAN

Planet GS-5220-16S8C Specifications

General

Brand	Planet
Model	GS-5220-16S8C
Category	Switch
Language	English