To Next Page

To Previous Page

Command Guide

-80-

4.2.47 erps <1-64> sub

Command:

erps <1-64> sub port0 interface {10GigabitEthernet, GigabitEthernet} <PORT0_ID>

{ { port0 interface {10GigabitEthernet, GigabitEthernet} <PORT1_ID> }, {interconnect

<major_ring_id: 1-64> [ virtual-channel ] } }

<1-64> ERPS group number

interconnect Sub ring is interconnected

<major_ring_id: 1-64> Major ring group number

virtual-channel Enable virtual channel for sub-ring

Default:

Usage Guide:

To create a profile and configure the Sub ERPS interface port 0, port 1.

Example 1:

To create a profile 3 and configure the Sub ERPS interface port 0(GigabitEthernet 1/5), port 1(GigabitEthernet 1/6)

without interconnected mode and Major Ring group and virtual-channel

Switch# configure terminal

Switch (config)# erps 3 sub port0 interface GigabitEthernet 1/5

port1 interface

GigabitEthernet 1/6

Example 2:

To create a profile 2 and configure the Sub ERPS interface port 0(GigabitEthernet 1/3), port 1(GigabitEthernet 1/4) with

interconnected mode and Major Ring group 1 and virtual-channel

Switch# configure terminal

Switch (config)# erps 1 sub port0 interface GigabitEthernet 1/3 int

erconnect 1

virtual-channel

4.2.48 erps <1-64> topology-change propagate

Command:

erps <1-64> topology-change propagate

<1-64> ERPS group number

topology-change Topology Change

propagate Propagate

Planet GS-5220-16S8C Command Guide

Other manuals for Planet GS-5220-16S8C