Planet GS-5220-16S8C - Ip Igmp Snooping; Ip Igmp Snooping Vlan

Command Guide
-206-
Default:
Disabled
Usage Guide:
To enable IGMP leave-proxy
Example:
To enable IGMP leave-proxy.
Switch# configure terminal
Switch (config)# ip igmp host-proxy leave-proxy
4.2.80 ip igmp snooping
Command:
ip igmp snooping
ip Internet Protocol
igmp Internet Group Management Protocol
snooping Snooping IGMP
Default:
Disabled
Usage Guide:
To enable IGMP Snooping.
Example:
To enable IGMP Snooping.
Switch# configure terminal
Switch (config)# ip igmp snooping
4.2.81 ip igmp snooping vlan
Command:
ip igmp snooping vlan <vlan_list>
ip Internet Protocol
igmp Internet Group Management Protocol
snooping Snooping IGMP
vlan IGMP VLAN
<vlan_list> VLAN identifier(s): VID