Command Guide
-220-
ipv6 IPv6 configuration commands
mld Multicast Listener Discovery
ssm-range IPv6 address range of Source Specific Multicast
<ipv6_mcast> Valid IPv6 multicast address
<Ipv6PrefixLength : 8-128> Prefix length ranges from 8 to 128
Default:
ff3e:: /96
Usage Guide:
To enable SSM Range of MLD.
Example:
To enable SSM Range (ff3e::7788/128) of MLD.
Switch# configure terminal
Switch (config)# ipv6 mld ssm-range ff3e::7788 128
4.2.100 ipv6 mld unknown-flooding
Command:
ipv6 mld unknown-flooding
ipv6 IPv6 configuration commands
mld Multicast Listener Discovery
unknown-flooding Flooding unregistered IPv6 multicast traffic
Default:
Enabled
Usage Guide:
To flood unregistered IPv6 multicast traffic.
Example:
To flood unregistered IPv6 multicast traffic.
Switch# configure terminal
Switch (config)# ipv6 mld unknown-flooding
To Next Page
Loading...
Need help?
General