Planet GS-5220-16S8C - Dot1 X System-Auth-Control; Dot1 X Timeout Quiet-Period

Command Guide
-72-
Default:
2
Usage Guide:
To define 802.1X re-authentication frequency for Network Access Server
Example:
To define 802.1X re-authentication frequency with 78 times for Network Access Server
Switch# configure terminal
Switch (config)# dot1x max-reauth-req 78
4.2.33 dot1x system-auth-control
Command:
dot1x system-auth-control
Default:
Disable
Usage Guide:
To enable 802.1X service for Network Access Server
Example:
To enable 802.1X service for Network Access Server
Switch# configure terminal
Switch (config)# dot1x system-auth-control
4.2.34 dot1x timeout quiet-period
Command:
dot1x timeout quiet-period <10-1000000>
quiet-period Time in seconds before a MAC-address that failed authentication gets a new authentication chance.
Default:
10
Usage Guide:
To configure 802.1X hold time for Network Access Server
Example:
To configure 802.1X hold time(12 seconds) for Network Access Server