Planet GS-5220-16S8C Command Guide

Command Guide
-266-
4.2.163 mvr vlan <vlan_list> name
Command:
mvr vlan <vlan_list> name
mvr Multicast VLAN Registration configuration
vlan MVR multicast vlan
<vlan_list> MVR multicast VLAN list
name MVR multicast name
Default:
None
Usage Guide:
To configure profile name of MVR VLAN
Example:
To configure profile name (6) of MVR VLAN (5)
Switch# configure terminal
Switch (config)# mvr vlan 5 name 6
4.2.164 network-clock clk-source <clk-source> aneg-mode
Command:
network-clock clk-source <clk-source> aneg-mode { master | slave | forced }
network-clock network-clock
clk-source clk-source - commands related to a specific clock source.
<clk-source : 1-2> Clock source number
aneg-mode Sets the preferred negotiation.
forced Activate forced slave negotiation
master Activate prefer master negotiation
slave Activate prefer slave negotiation
Default:
None
Usage Guide:
To configure preferred negotiation of network-clock
Example:
To configure preferred negotiation (slave) of network-clock (source 1)

Planet GS-5220-16S8C Specifications

General

Model	GS-5220-16S8C
Type	Managed Switch
Weight	3.5 kg
Power Input	100-240V AC, 50/60Hz
Ports	16 x SFP + 8 x RJ45
Layer	L2/L3
Switch Architecture	Store-and-Forward
Throughput (packet per second)	35.7Mpps
MAC Address Table	16K entries
Jumbo Frame	9K
Operating Temperature	0 to 50°C
Storage Temperature	-40 to 70°C
Switch Fabric	48 Gbps / non-blocking
Humidity	5% to 95% (non-condensing)