Planet GS-5220-16S8C - Transport Email to; Upnp

Command Guide
-319-
4.2.220 transport email to
Command:
transport email to <1 | 2> <mail_addr>
transport Enable or disable transport email function.
email Enable or disable transport email function.
to receiver's email
<1|2> 1: mail address 1 2: mail address 2
<mail_addr> mail address
Default:
N/A
Usage Guide:
To configure SMTP destination mail address.
Example:
To configure SMTP destination mail address 1 (ss@planet.com.tw).
Switch# configure terminal
Switch (config)# transport email to 1 ss@planet.com.tw
4.2.221 upnp
Command:
upnp
upnp Set UPnP's configurations
Default:
Disabled
Usage Guide:
To enable the UPnP service
Example:
To enable the UPnP service
Switch# configure terminal
Switch (config)# upnp