Planet GS-5220-16S8C - Copy

Command Guide
-329-
group Web privilege group
<vlan_id> VLAN ID, 1-4095
<group_name> Valid words are 'Aggregation' 'DHCP' 'Debug' 'Dhcp_Client' 'Diagnostics' 'EPS' 'ERPS'
'ETH_LINK_OAM' 'EVC' 'Green_Ethernet' 'IP2' 'IPMC_Snooping' 'LACP' 'LLDP' 'Loop_Protect'
'MAC_Table' 'MEP' 'MVR' 'Maintenance' 'Mirroring' 'NTP' 'POE' 'PTP' 'Ports' 'Private_VLANs' 'QoS'
'RPC' 'Security' 'Spanning_Tree' 'System' 'Timer' 'UPnP' 'VCL' 'VLAN_Translation' 'VLANs'
'Voice_VLAN' 'XXRP' 'ZL_3034X_API'
level Web privilege group level
cro Configuration Read-only level
crw Configuration Read-write level
sro Status/Statistics Read-only level
srw Status/Statistics Read-write level
Default:
N/A
Usage Guide:
To configure the Privilege Level
Example:
To configure the Privilege Level (below table)
Switch# configure terminal
Switch (config)# web privilege group Aggregation level cro 3 crw 4 sro 3 srw 5
4.3 copy
4.3.1 copy
Command:
copy { startup-config | running-config | <source_path> } { startup-
config |
running-config | <destination_path> } [ syntax-check ]
copy Copy from source to destination
flash:filename | tftp://server/path-and-filename File in FLASH or on TFTP server
running-config Currently running configuration
startup-config Startup configuration Output modifiers
syntax-check Perform syntax check on source configuration