Command Guide
-336-
Default:
None
Usage Guide:
To swap Active and Alternate firmware image
Example:
To swap Active and Alternate firmware image
Switch # firmware swap
4.13.2 firmware upgrade
Command:
firmware upgrade <tftpserver_path_file>
firmware Firmware upgrade/swap
upgrade Firmware upgrade
<TFTPServer_path_file : word> TFTP Server IP address, path and file name for the server
containing the new image.
Default:
None
Usage Guide:
To upgrade firmware via TFTP Server
Example:
To upgrade firmware via TFTP Server (File: tftp://192.168.0.11/switch.bin)
Switch # firmware upgrade tftp://192.168.0.11/switch.bin
4.14 ip
4.14.1 ip dhcp retry interface vlan
Command:
ip dhcp retry interface vlan <vlan_id>
ip IPv4 commands
To Next Page
Loading...
Need help?
General