Planet IMG-110T - LED Indicators

User’s Manual of IMG-110T
-13-
Figure 2-2 shows the front panel of the Industrial Modbus Gateway.
Figure 2-2: Industrial Modbus Gateway Front Panel
2.1.2 LED Indicators
■ LED Definition
■ System
LED Color Function
Power Green Lights to indicate the system has power.
■ 10/100BASE-TX Interface
LED Color Function
LNK/ACT Green
Lights: To indicate the link through that port is successfully established.
Blinks:
To indicate that the IMG-110T is actively sending or receiving data over that port.
■ RS422/RS485 Serial Port
LED Color Function
TX1 Green Blinks:
To indicate that the IMG-110T is actively transmitting data over that port.
RX1 Green Blinks:
To indicate that the IMG-110T is actively receiving data over that port.